Products link
Heat & Thermodynamics
Electromagnetics
Electronics & Communication
Optics Experiment Instruments
Advanced Physics
Spectroscopic Instruments
Light Sources
Opto-Mechanics
 

Experiment Education Kits

LEOK-1 Optics Experiments-Basic
LEOK-2 Holography & Interferometry
LEOK-3 Optics Experiments-Enhanced
LEOK-4 Geometrical Optics Kit
LEOK-5 Aberration & Fourier Optics
LEOK-6 Optics Experiments-Extended
LEOK-10 Holography Kit-Basic
LEOK-11 Holography Kit-Complete
LEOK-20 Fiber Optics Kit-Basic
LEOK-21 Fiber Optics Kit-Complete
LEOK-22 Fiber Optics Kit-Enhanced
LEOK-30 Newton's Ring Apparatus
LEOK-40 Modern Optics Experiments
LEOK-41 White-Light Image Processing
LEOK-42 Fourier Optics Experiments
LEOK-43 Information Optics Kit
LEOK-44 Image Addition/Subtraction
LEOK-46 Image Differentiation
LEOK-48 Image Convolution
LEOK-50 Experiments with LC-SLM
LEOK-64 Room Light Holography
 

Measuring air index

Setup of measuring the refractive index of air

 

Recording hologram

Setup of recording and reconstructing holograms

 

Constructing grating spectrometer

Setup of assembling a Littrow-type grating spectrometer

 

Analyzing polarization status

Setup of analyzing polarization status of light beams

 

Determining nodal locations

Setup of determining the nodal locations & measuring the focal length of a lens-group

 
      
LEOK-3

Optics Experiment Kit - Enhanced Model

LEOK-3 Optics Experiment Kit - Enhanced Model
 
Features    
26 fundamental experiment examples
Cost effective solution
Detailed instruction manual
Easy alignment
      
Introduction    

The LEOK-3 Optics Experiment Kit is developed for general physics education at universities and colleges. It provides a complete set of optical and mechanical components as well as light sources. Almost all optics experiments required in general physics education (e.g. geometrical, physical, and modern optics) can be constructed in sequence using these components. Through selecting and assembling corresponding components into setups, students can enhance their experimental skills and problem solving ability. The instruction manual contains comprehensive materials including experiment setups, principles, procedures and required parts with photos. 


LEOK-3 shows a total of 26 experiment examples which are grouped in six categories:


Lens Measurements: Understand and verify lens equation and optical rays transformation.
Optical Instruments: Understand the principle and operation of common lab optical instruments.
Interference Phenomena: Understand interference theory, observe various interference patterns generated by different sources, and learn one precise measurement method based on optical interference. 
Diffraction Phenomena: Understand diffraction effects, observe diffraction patterns by different apertures. 
Analysis of Polarization: Understand polarization and verify types of polarized light.
Fourier Optics and Holography: Understand principles of advanced optics and their applications.

 

The list of the 26 experimental examples is as follows:

 

1. Measure lens focal length using auto-collimation

2. Measure lens focal length using displacement method

3. Measure the focal length of an eyepiece

4. Assemble a microscope

5. Assemble a telescope

6. Assemble a slide projector

7. Determine the nodal locations & focal length of a lens-group

8. Assemble an erect imaging telescope

9. Young's double-slit interference

10. Interference of Fresnel's biprism

11. Interference of double mirrors

12. Interference of a Lloyd's mirror

13. Interference-Newton's rings

14. Fraunhofer diffraction of a single slit

15. Fraunhofer diffraction of a circular aperture

16. Fresnel diffraction of a single slit

17. Fresnel diffraction of a circular aperture

18. Fresnel diffraction of a sharp edge

19. Analyze polarization status of light beams

20. Diffraction of a grating

21. Assemble a Littrow-type grating spectrometer

22. Record and reconstruct holograms

23. Fabricate a holographic grating

24. Abbe imaging and optical spatial filtering

25. Pseudo-color encoding, theta modulation and color composition

26. Assemble a Michelson interferometer and measure the refractive index of air

               
A breakdown list of parts for individual experiment can be downloaded hereLEOK-3 Brochure.
 
Partial Parts of LEOK-3 (for full list of parts, please see brochureLEOK-3 Brochure)
Low-Pressure Mercury Lamp (LLE-1)
20 W with power supply, 1 set
Low-Pressure Sodium Lamp (LLE-2)
20 W with power supply, 1 set
He-Ne Laser (LLL-2)
1.5 mW with power supply, 1 set
Two-Axis Stage (LEPO-2)
X translation (10 mm), Z-adjustable (15 mm), 1 pc
Z-Adjustable Post Holder (LEPO-3)

Travel 15 mm with a magnetic base, 1 pc

Multi-Pinhole Disc Assembly ( LEPO-24 )
Φ 0.10, 0.15, 0.20, 0.30, 0.50, 0.60, 1.00, 2.00 mm, 1 pc
Single-Side Adjustable Slit ( LEPO-28 )
Slit width 0-2 mm,slit direction rotation within ± 5°, 1 pc
Lens Group Holder ( LEPO-29 )
Movable on rail for nodal measurement, 1 pc
Double Porro Prism Assembly (LEPO-31)
For inverting image in two directions, 1 set
Standing Ruler ( LEPO-34 )
For measuring telescope's magnification, 1 pc
Direct Measurement Microscope (LEPO-C2 ) Measurement microscope, 20X, 1 pc
Optical Rail with Carriers (LEPO-54)
1.0 meter dovetail rail, 7 carriers, 1 set
 
  Top >>